Stylish Kitchen Upgrades From Diy Kits

Built-In Seating: The Inspiration

A bench with a high back and shapely sides stylishly maximizes space for diners in tight quarters. The Kit We Picked Shaker Warming Bench, Van Dykes Restorers Why We Liked It Creative freedom. The kit includes precut pieces crafted from sturdy unfinished stock, the necessary fasteners, and little more, leaving custom tailoring and the final finish to your imagination. The Specs Red oak, 13½ by 37½ by 48 inches What It Costs About $240 How Much About $360. A similar, fully assembled and finished white pine bench from a furniture company costs around $600.

Built-In Seating: Tips and Ideas

• To smoothly drive fasteners and prevent wood from splitting, drill additional pilot holes where pieces come together. Insert your drill bit through the existing pocket-screw holes to create a path for the screw in the adjoining piece. • Use a router to create a bead along the edges for a more decorative look. You can also recess the seat apron by ¼ inch to create a nice reveal.

Built-In Seating: Pro Advice

Reinforce the back panel, which is designed to be glued in place, with ¾-inch wood screws for added strength. This will also pull the panel tight against the seat’s rear edge, preventing any gaps where paint or stain could pool.

Plate Rack Cabinet Insert: The Inspiration

Perfectly sized slots for plates create an orderly presentation in your kitchen. The Kit We Picked Plate Display Rack, Omega National Products Why We Like It Easy installation. The kit shakes out of the box like pickup sticks, without directions, but it’s still a cinch to assemble. The Specs Four 30-inch top and bottom maple rails, and thirty-two 12-inch dowels. Trim the length of the rails and height of the dowels to fit your particular cabinet dimensions. What It Costs About $51 How Much You Save About $250. A custom cabinet manufacturer charges around $300 for a similar insert.

Plate Rack Cabinet Insert: Tips and Ideas

• Paint or stain individual dowels and rails before assembly for easy access to small parts and to prevent drips inside the cabinet. • Cut your own spacer strips and glue them between the front and back sections to form a single, self-supporting unit. This way you don’t have to mess with aligning the two separate pieces inside the cabinet.

Plate Rack Cabinet Insert: Pro Advice

Use your own plates as a guide. Before securing the rack in place with wood glue and screws, make sure dishes are centered inside and don’t stick too far out of the cabinet; leave at least 2 inches at the front and back.

Wine Rack Cabinet Insert: The Inspiration

Wine bottle-sized cubbies give your cabinetry a customized look. The Kit We Picked Sonoma Series Wine Rack, Kitchen Source Why We Like It Lots of sizes. Components can be ordered to fit various cabinet dimensions; the largest one corrals 28 bottles. The Specs The one we chose has two 17-by-29-inch maple lattice grids to fit in a standard-size upper cabinet and securely hold 18 bottles. What It Costs About $94 How Much You Save About $900. A custom cabinet manufacturer charges up to $1,000 for a similar built-in rack.

Wine Rack Cabinet Insert: Tips and Ideas

Once installed, add a face frame made of moldings that complement your cabinet style for a more finished look.

Wine Rack Cabinet Insert: Pro Advice

For the spacer strips, use a combination of wood glue, for long-term strength, and yellow hot glue, which is stronger than clear, for quick tack during assembly.

Appliance Garage: The Inspiration

A sleek housing for your coffeemaker and toaster minimizes countertop clutter. The Kit We Picked Straight Appliance Garage, Cabinet Parts Why We Like It Simple assembly. Pieces easily fit together like a puzzle with tongue-and-groove joinery. Just add wood glue for extra strength. The Specs 18-inch-tall solid maple frame, spring-loaded solid maple tambour door, and maple-veneered sides. What It Costs About $133 How Much You Save About $67. A cabinet manufacturer will charge you around $200 for a unit like this one.

Appliance Garage: Tips and Ideas

If the distance between your countertop and cabinets is more than 18 inches, install a decorative header board to fill the space. If it’s less, the frame can be shortened by up to 6 inches.

Range Hood Cover: The Inspiration

A wood canopy that’s finished to match kitchen cabinets artfully conceals a ventilation system The Kit We Picked Hardwood Range Hood, Hoffco, Inc. Why We Like It Easy to retrofit. An optional conversion kit with two fluted filler strips lets you fit the hood into a 30- or 36-inch opening between your upper cabinets. Choose from five different wood species, including maple (shown). The Specs 30-inch-wide-by-24-inch-tall hood, metal liner that mounts to surrounding cabinets, and filler strips. What It Costs About $281. Internal ventilators, which start at $119, are sold separately. How Much You Save More than $500. A wood hood manufacturer charges upwards of $800 for a model like this one.

Range Hood Cover: Tips and Ideas

Personalize your hood with a decorative apron. Make it out of stock molding from the home center, or choose from three styles offered by the kit manufacturer starting at an additional $37. The English country apron is shown here. Paint or stain the hood to match surrounding cabinets, or finish it in a complementary hue for a bold accent.

Rolling Ladder: The Inspiration

A library-style ladder prevents the space in high-up kitchen cabinets from going to waste. The Kit We Picked Quiet Glide Wooden Ladder and Hardware, Custom Service Hardware Why We Like It À la carte ordering. Parts are sold separately in a variety of wood types and hardware finishes, letting you customize a kit for your kitchen and budget. The Specs We chose an 8-foot-tall unfinished red oak ladder with metal rung supports, an 8-foot-long track, top rollers that allow the ladder to glide on the track, and bottom wheels. What It Costs About $802 How Much You Save $200 or more. Prices for a similar setup from a library ladder manufacturer start at $1,000.

Rolling Ladder: Tips and Ideas

• Create a parking spot for your ladder by installing a track that’s about 2 feet longer at one end than your bank of cabinetry. That way it won’t block access to doors or appliances when not in use. • Order a ladder that’s at least 5 inches taller than the height of the rail on the wall. Any shorter and the angle will be too steep for comfortable climbing; any longer and it’ll eat up valuable floor space.

Rolling Ladder: Tips and Ideas

• Choose a hardware finish that echoes the tone of your existing cabinet knobs for a pulled-together appearance. • Save an extra $200 by purchasing just the hardware and installing it on your own ladder.